iSoaker.com Home
 Water Guns / Blasters | Repairs | Tech | Games | For Players | For Teams | Battle Stories | Galleries
 
iSoaker.com

Tech Research :.

Water Blaster Concepts

The following ideas are concepts for possible future water blasters which build upon what is already out there:

CPS-Shotgun: Combine the power of the CPS series with a nozzle like those found on the XP 75 when its nozzle is removed. In other words, this blaster would not fire a stream, rather a spreading blast of water. Range of this blaster would be hampered by this design but area covered by water would be greatly increased. (Suggested in 1999)
CPS-MDS: Combine CPS power with a movable nozzle like that found on the SS:MDS and one now can fire safely and powerfully even around corners without fear of return-fire. (Suggested in 1999)
Flexi-Pak: A 6-8L backpack for holding water akin to the CPS 3000's but with an adapter to attach to most CPS, SC and newer XP models which have the screw-on reservoir cap. Imagine giving an XP 110 an 8L reservoir. (Suggested in 1999)
Modular Soaker: Imagine having a building set made up of interchangeable pieces so you can put together one's own design. Though I'm not sure how this can technically work, the idea of being able to take prefabricated modular parts to build a Super Soaker® like building with Lego(tm) would be a novel design.(Suggested in 2000)
Monster Plus: Take the existing Monster weaponry and attach a large (8L) backpack to it in place of the small reservoir. Have the backpack also QFD-fillable (like the backpack on the CPS3200). (Suggested in 2000)
Trigger Variable Soaker: A soaker with a variable nozzle that expands in diameter the harder you pull on the trigger. The blaster would need to have a decent-sized CPS firing chamber. The nozzle size range could vary from 2x-20x just by squeezing more. This would make it easier to dish out more soaking when needed instead of having to switch nozzles on multi-nozzle blasters mid-water war. (Suggested in 2001)
Super Soaker® Accessories: The following ideas are not weaponry but rather gear which would seriously enhance water fights if available:

Various Concept Blasters:

Concept1

Concept2

Concept3

These Previously Posted Ideas Have Now Become a Reality:

CPS^2: Double-barrelled CPS-based water blaster. 'nuff said. (Known as the Monster XL) (Suggested in 1999; Reality in 2000)
CPS-SC Hybrid: Unlike the SC 500 and SC 600, the CPS-SC Hybrid series would be of the same size and calibre of the current CPS series but have the added feature of being able to quickly refill using the QFD. Imagine a CPS 1000 which could be refilled completely almost as quickly as one can empty it. (Known as the Monster Series) (Suggested in 1999; Reality in 2000)

Submitted Concepts:

By: Yannick M.

concept_yannick01

This soaker is like an innovation to the Cps 2500. First, the gun is about 75 cm long instead of 88 cm (In water warfare you will not be spotted as easily because off gun sticking out of the bush. Also, the 13 cm difference would make it easier to run with.) Saturator nozzle is from the SC power pack. Basically it is a nozzle with many holes. Instead of having a 650 mL firing chamber, it would change to 850 mL firing chamber for longer shot time. Nozzle selector would be controlled by a switch. 3.5 litre reservoir instead of a 3.1 litre reservoir. With the Cps 2600, you could get 4 shots. The gun would be a bit heavier but would be smaller. This would be my weapon of choice.

By: Jak W.

Super Soaker Assault Rifle
Image used with permission - not for redistribution without prior consent.

 Home | Forums | Help | About | Site Index | Search | Terms of Use | Help Support This Site iSoaker.com
 ©2000-2009 iSoaker.com. All rights reserved.