Tech Research .:
Super Soaker Monster XL Internals
By: iSoaker.com, Newb, and Peter MJ
By: iSoaker.com
 Unopened Monster XL showing the position of the screws. |
 Side case removed. Note: the dual CPS-pressure chambers are in their own casing and cannot be as easily accessed. |
 Reservoir intake area also showing the pump shaft valves and over-pressure valve. |
 Close-up of the SC-filling port connection. |
 Close-up of trigger spring area. |
 Monster XL bipod leg removal. The white disc is normally found between the leg and body of the blaster, restricting leg movement to the arc-length of the "C" groove. |
Monster XL Valve (from Newb):
Here are the pictures of the valve. The problem was "A" had fallen out. So I used super glue to glue it back on. Now I have to get some sort of glue to close it together.
 |
 |
 |
