Tech Research :.

Water Warriors Orca Internals

Water Warriors Orca Review

Images from iSoaker.com

Note: most of these internal pictures are missing the proper configuration of the trigger/valve-nozzle lever as it was removed for repairs. The last picture in this set shows the repaired nozzle valve assembly which is what a stock valve would look like (apart from the additional glue/wire).

Preparing to open the Water Warriors Orca	Water Warriors Orca with side covered removed (wires to battery compartment still attached).	Pump shaft and pressure chamber.
Close-up of check valve assembly around the pump area as well as the reservoir intake point (reservoir has an intake tube that extends deeper into it).	Close up of underside of "Hydro Power" pressure chamber assembly.	Close up of nozzle valve area (nozzle lever disassembled due to being repaired).
	Close up of repaired nozzle valve lever (originally, there is no metal band wrapping around the base of the ball valve lever).

See Water Warriors Orca Valve Lever Repair article for more information on this repair.