The ArmouryTech/RepairsWater WarfareGeneral Information
@iSoaker Warriors (Twitter)

The Armoury Review :: Water Worm (3lbs)

.: No notable statistics currently available



Manufacturer: X-Concepts

Class:  Elastic - Bladder

  Item Number:
  Copyright Date / Release Date: 0 / 2004
  Availability: No Longer Made


Basic Statistics ::

  Weight: 0.00 g (0 oz.)
  Reservoir Volume: 0.00 mL (0 fl.oz.)
  Pressure Chamber Volume: N/A
  Pump Volume: N/A Ratings .:

Power: N/A

Range: N/A

Encumbrance: N/A

Ergonomics: N/A

Capacity: N/A

Overall: N/A

Blaster Dimensions :: N/A x N/A x N/A

Length x Width x Height

Version Colours .:



Pressure Chamber



Nozzle Information: 1 .:


Range (level)

Range (45°)


iSoaker Output Rating

iSoaker Power Rating

Shot Time









  • Most statistics are from models tested by; individual performance may vary; some models exhibit greater variability than others (i.e. output, range, colours, etc.)
  • Please reference if you use any information from any part of this website.

Own this product?

Submit a Review Online

Compare Products

Product Comparison Page

Search For Another?


More Water Blaster Images Water Blaster Videos Water Blaster Internal Pictures Uses QFD / Fast-Fill Device Blaster Inspector


The Water Worms series of water blasters is an odd departure from the standard soaker. For all intents and purposes, it is similar to mounting a nozzle with a valve onto a CPS-like chamber. However, a model is currently unavailable at for review. All that is known regarding this water blaster is from the submitted review.





:: Submitted Reviews

Review by Veteran | Posted: 20040319

3 Pound Water Worm

(Shown above empty, filled and with qfd)


Length (before filled): 48.5cm | Length (when filled): 101cm

Body Width (before filled): 2cm | Body Width (when filled): 5.5cm

Head Width: 8cm
Tail Width: 6cm
Nozzle: 2mm diameter, 6.28mm circumference
Quickfill Device Height: 5cm
Quickfill Device Width: 4.5cm
Range: 7.3 meters
Nonstop Firing Time: ~57seconds


This is a very interesting weapon, to say the least. Its stream though the nozzle is small is very large and has a good range. I suspect it could hold against almost any water gun, with the exception of Monsters and Backpack Cannons. The Water Worm 3lbs uses a cylinder shaped quickfill device to fill using a hose, it has no alternative filling option. Although it’s very hard to hold, I suppose you could curl it up and put it in a backpack with the nozzle protruding. One of the two I bought sprung a leak so I dissected the blaster. It has a very basic design, and it looked really easy to mod or duplicate. Its just some surgical tubing that expands in fabric when it’s filled, and you pull back the head to release the water. I’m sure the idea could go a lot farther with a lot more power, but this is a good gun to buy because of its originality and surprising effectiveness.


This soaker is surprisingly powerful and could stand up to most CPS soakers, especially at a distance. It also holds an incredible amount of water, able to fire continuously for about 57 seconds! Its range doesn’t decrease as it loses water, so its effective until it runs dry.


The major flaw in this soaker is the quickfill device. When you first fill the blaster all seems well, until you have to fill it again. The worm can only be filled when there is NO pressure going into the qfd. The qfd for some reason siphons water even when the hose has been turned off. To refill the gun, unless your lucky you have to pull the qfd off and put it back on to refill. Its also awkward to hold and fire.

Related Content .:

 Product Listing Page 

Additional Resources

Water Blaster: Basics | Care, Cleaning, and Storage | Soaker Use: Basics|Repair Articles|Elastic Pressure-Based Tech Troubleshooting|Elastic Pressure System Blaster Usage|Quickfill Tech Troubleshooting Home | Help | About | Glossary | Search | Site Index | Contact Us
||| Terms of Use | Support This Site
 ©2000-2016 All rights reserved.